Relación entre la compresión maxilar y potencial impactación del canino superior: Scoping review

El canino maxilar permanente corresponde al segundo diente más frecuentemente impactado en el arco dental. La etiología de esta patología aún no está totalmente definida, sin embargo, investigadores plantean la deficiencia del ancho del hueso maxilar como una posible causa. Objetivo: Investigar la evidencia que asocia menores dimensiones transversales del maxilar a la ocurrencia de la impactación de caninos superiores y esclarecer la posible relación. Materiales y métodos: Se realizó una revisión sistemática exploratoria a partir de una búsqueda amplia de la literatura en bases de datos PubMed, Cochrane, EBSCO y Multibuscador UNAB. Los artículos fueron recopilados, identificados y filtrados según el diagrama de flujo de declaración PRISMA. Resultados: La búsqueda identificó 755 estudios, de los cuales 14 fueron incluidos. Los estudios varían en diseño, edad de estudio y métodos de diagnóstico. La mitad de los estudios reporta una asociación positiva entre compresión maxilar e impactación canina superior, mientras que la otra mitad una asociación negativa. Conclusiones: No hay evidencia suficiente para poder asociar compresión maxilar con impactación de caninos superiores. Estudios con métodos de diagnóstico rigurosos son necesarios para una mejor comprensión. No obstante, se enfatiza la importancia de un diagnóstico precoz, para garantizar mejores resultados y pronóstico más favorable.

The permanent maxillary canine is the second most frequently impacted tooth in the dental arch. The etiology of this disease is not completely defined, yet some researchers propose the deficiency of the width from the maxilla as a possible cause. Objective: To investigate available evidence correlating smaller transverse maxilla dimensions with the occurrence of potential impaction of upper canines and clarify the possible relation. Materials and methods: A systematic exploratory review was carried out based on comprehensive search of the literature in databases such as PubMed, Cochrane, EBSCO and UNAB multi search engine. The articles were compiled, identified and filtered systematically according to the PRISMA flow diagram. Results: Our search identified 755 studies, 14 of which were included. These studies vary in design, patients age, and methods for detection. Half of the studies show a positive correlation between maxillary compression and potential upper canine impaction, whereas the other half show a negative correlation. Conclusions: There is not enough evidence to link maxillary compression to upper canine impaction. Studies with rigorous diagnostic methods for detection are necessary for a better understanding of this relation. Nonetheless, the importance of early diagnosis must be emphasized to guarantee better results and a more favorable prognosis.

Osteonecrose dos maxilares relacionada ao uso demedicamentos: características patológicas, diagnóstico,prevenção e estratégias terapêuticas / Medication-related osteonecrosis of the jaws: pathological characteristics, diagnosis, prevention and therapeutic strategies

Objetivo: Este trabalho tem como propósito fornecer uma análise abrangente das características clínicas, etiológicas, radiográficas e histopatológicas da osteonecrose dos maxilares relacionada ao uso de medicamentos, além de abordar os métodos de diagnóstico, prevenção e estratégias terapêuticas. Materiais e métodos: foi realizada uma busca por artigos científicos publicados no período de 2015 a 2023, utilizando as bases de dados Scientific Electronic Library Online (SciELO), US National Library of Medicine (PubMed) e ScienceDirect. Conclusão: Embora infrequente, há um considerável potencial de ocorrência de osteonecrose dos maxilares em pacientes submetidos a terapia prolongada com medicamentos antirreabsortivos e antiangiogênicos, especialmente quando não são adotadas medidas preventivas adequadas. A implementação de práticas preventivas, a vigilância das condições bucais e a colaboração de uma equipe multidisciplinar são fundamentais para reduzir os riscos associados a essa condição patológica.(AU)

Objective: This work aims to provide a comprehensive analysis of the clinical, etiological, radiographic and histopathological characteristics of Medication-Related Jaw Osteonecrosis, in addition to addressing diagnostic methods, prevention and therapeutic strategies. Materials and methods: A search was carried out for scientific articles published between 2015 and 2023, using the Scientific Electronic Library Online (SciELO), US National Library of Medicine (PubMed) and ScienceDirect databases. Conclusion: Although infrequent, there is a considerable potential for osteonecrosis of the jaw to occur in patients undergoing prolonged therapy with antiresorptive and antiangiogenic medications, especially when adequate preventive measures are not adopted. The implementation of preventive practices, surveillance of oral conditions and the collaboration of a multidisciplinary team are essential to reduce the risks associated with this pathological condition.(AU)

Correlation between cleft width and dental arch symmetry in cleft lip and palate: a longitudinal study

Abstract This study aimed to evaluate the influence of cleft width on dental arch symmetry of children with unilateral cleft lip and palate. Forty-one children were subjected to impression preoperatively (T1; mean age = 0.31 ± 0.07 years) and postoperatively (T2; mean age = 6 .73 ± 1.02 years). Eighty-two digitized dental casts were analyzed by stereophotogrammetry software. The cleft palate width was measured in the anterior (P-P'), middle (M-M'), and posterior (U-U') regions. Also, the following measurements were obtained: anterior intersegment (I-C') and intrasegment (I-C); total intersegment (I-T') and intrasegment (I-T); cleft-side (C'-T') and non-cleft-side (C-T) canine tuberosity. Paired t test and Pearson correlation coefficient were applied (α = 5%). Cleft width had the following means: 10.16 (± 3.46) mm for P-P', 12.45 (± 3.00) mm for M-M', and 12.57 (± 2.71) mm for U-U'. In the longitudinal analysis, I-C' had a significant reduction, while the other measurements significantly increased (p < 0.001). Asymmetry was verified in the following analyses at T1: I-C' vs. I-C and I-T' vs. I-T (p < 0.001); at T2, only in I-C' vs. I-C (p < 0.001). At T1, P-P' vs. I-C' (r = 0.722 and p < 0.001), P-P' vs. I-T' (r = 0.593 and p < 0.001), M-M' vs. I-C' (r = 0.620 and p < 0.001), and M-M' vs. I-T' (r = 0.327 and p < 0.05) showed a positive and significant correlation. At T2, there was a correlation between M-M' and I-C' (r = 0.377 and p < 0.05). In conclusion, the anterior and middle cleft widths influenced palatal asymmetry in the first months of life, while middle width influenced residual asymmetry.

Configurações dentárias reduzidas no contexto de estudos epidemiológicos: associação com desfechos de saúde e validação de critério diagnóstico / Shortened dental configurations in the context of epidemiological studies: association with health outcomes and validation of diagnostic criteria

Objetivou-se mapear os conceitos de configuração dentária reduzida empregados em estudos epidemiológicos associados com desfechos em saúde (estudo 1), bem como avaliar a validade de uma configuração utilizada em estudos epidemiológicos (pares de dentes antagonistas) (Estudo 2). Para o estudo 1 realizou-se uma revisão de literatura do tipo Scoping review com busca nas bases de dados PubMed/Medline, Scopus, Web of Science, Scielo e Cochrane. Dois pesquisadores treinados realizaram a seleção e extração de dados de estudos que avaliaram a associação entre configuração dentária reduzida (exposição) e desfechos em saúde clínicos e centrados na pessoa (saúde geral e saúde bucal), relacionados ao comportamento em saúde (padrões de dieta), além de mortalidade. Desfechos foram classificados de acordo com a Classificação Internacional de Funcionalidade, Incapacidade e Saúde e com a Classificação Internacional de Doenças da Organização Mundial de Saúde (OMS). Configurações dentárias reduzidas basearam-se na contagem de dentes presentes, na posição dos dentes considerando estética, oclusão dentária e condições periodontais. A busca inicial resultou em 12525 referências, sendo 283 incluídos. A atualização da busca incluiu 117 artigos (ntotal=400). Saúde geral (n=186) e saúde bucal (n=192) foram abordadas em número semelhante de estudos. A maioria dos desfechos foram clínicos de saúde geral (n=169), sendo as doenças endócrinas, nutricionais ou metabólicas (n=55) frequentes. Em 144 estudos foram abordadas medidas centradas na pessoa, sendo a qualidade de vida relacionada a saúde bucal (QRSB) a mais frequente (n=60). Os desfechos clínicos de saúde bucal foram predominantemente relacionados às funções de ingestão (n=42) e doenças ou distúrbios do complexo orofacial (n=23). Padrões de dieta (n=39) e mortalidade (n=34) também foram estudados. A configuração dentária reduzida definida como meta pela OMS foi a mais frequente (n=181). Para o estudo 2 avaliou-se a acurácia de pares de dentes antagonistas para mensurar a presença de pares de pré-molares e molares em contato oclusal e a concordância entre a prevalência de Arco Dental Reduzido (ADR) e Dentição funcional (DF) quando unidades oclusais dentárias (UOs)/pares de oclusão posterior (POPs) foram definidas por pares de dentes antagonistas ou pares de dentes em contato oclusal. Dados obtidos em inquérito epidemiológico de saúde bucal realizado em município de Minas Gerais, Brasil. UOs e POPs foram definidos pelo critério epidemiológico (condição da coroa dentária) ou critério clínico "padrão ouro" (registro em papel carbono dos contatos oclusais durante a máxima intercuspidação habitual). Foram calculados sensibilidade, valor preditivo positivo (VPP), valor preditivo negativo (VPN) e acurácia do critério epidemiológico. Sensibilidade, especificidade, VPP e VPN foram 88,5, 87,9, 92,5 e 81,9%, respectivamente, e acurácia foi de 88,3%. Os resultados sobre a concordância observada, coeficientes Kappa e valores estatísticos ß em relação à prevalência de ADR e DF (antagonista e contato oclusal) variaram de 0,82 a 0,98, indicando alto índice de concordância. Efeitos das configurações dentárias reduzidas têm sido investigados principalmente em relação às doenças endócrinas, nutricionais ou metabólicas e medidas de QVRSB. Há diversidade de desfechos em saúde. Critério epidemiológico mostrou-se válido e pode ser utilizado em estudos epidemiológicos para calcular a prevalência de configurações dentárias reduzidas que consideram POPs.

This study mapped definitions of shortened dental configurations and health outcomes employed in association studies (Study 1), as well as to evaluate the validity of a configuration used in epidemiological studies (pairs of antagonistic teeth) (Study 2). For study 1, a literature review of the Scoping review type was carried out with a search in PubMed/Medline, Scopus, Web of Science, Scielo and Cochrane databases. Two trained researchers performed the selection and data extraction of studies that evaluated the association between reduced tooth configuration (exposure) and clinical and person-centered health outcomes (general health and oral health), related to health behavior (dietary patterns), in addition to mortality. Outcomes were classified according to the International Classification of Functioning, Disability and Health and the International Classification of Diseases of the World Health Organization (WHO). Shortened dental configurations were based on the number of teeth present, the position of the teeth regarding esthetics, dental occlusion and periodontal conditions. The initial search resulted in 12525 references, 283 of which were included. The search update included 117 articles (ntotal=400). General health (n=186) and oral health (n=192) were addressed in a similar number of studies. Most outcomes were general health clinics (n=169), with endocrine, nutritional or metabolic diseases (n=55) being frequent. In 144 studies, person-centered measures were addressed, with oral healthrelated quality of life (OHQoL) being the most frequent (n=60). Clinical oral health outcomes were predominantly related to eating functions (n=42) and diseases or disorders of the orofacial complex (n=23). Diet patterns (n=39) and mortality (n=34) were also studied. The shortened dental configuration defined as a goal by the WHO was the most frequent (n=181). For study 2, the accuracy of pairs of antagonistic teeth was evaluated to measure the presence of pairs of premolars and molars in occlusal contact and the agreement between the prevalence of Shortened Dental Arch (SDA) and Functional Dentition (FD) when units occlusal (UOs)/posterior occlusion pairs (POPs) were defined by pairs of antagonistic teeth or pairs of teeth in occlusal contact. Data obtained from an epidemiological survey of oral health carried out in the municipality of Minas Gerais, Brazil. UOs and POPs were defined by epidemiological criteria (condition of the dental crown) or clinical "gold standard" criteria (carbon paper recording of occlusal contacts during maximum habitual intercuspation). Sensitivity, positive predictive value (PPV), negative predictive value (NPV) and accuracy of the epidemiological criterion were calculated. Sensitivity, specificity, PPV and NPV were 88.5, 87.9, 92.5 and 81.9%, respectively, and accuracy was 88.3%. The results on observed agreement, Kappa coefficients and ß statistical values in relation to the prevalence of SDA and FD (antagonist and occlusal contact) ranged from 0.82 to 0.98, indicating a high level of agreement. Effects of reduced tooth configurations have been investigated mainly in relation to endocrine, nutritional or metabolic diseases and OHQoL measures. There is a diversity of health outcomes. Epidemiological criteria proved to be valid and can be used in epidemiological studies to calculate the prevalence of reduced dental configurations that consider POPs.

Surgical effects of rehabilitation protocols on dental arch occlusion of children with cleft lip and palate

Aim: to evaluate the surgical effects of two rehabilitation protocols on dental arch occlusion of 5-year-old children with or without cleft lip and palate. Methods: this is a retrospective longitudinal study the sample comprised 45 digitized dental casts divided into followed groups: Group 1 (G1) ­ children who underwent to cheiloplasty (Millard technique) at 3 months and to one-stage palatoplasty (von Langenbeck technique) at 12 months; Group 2 (G2) ­ children who underwent to cheiloplasty (Millard technique) and two-stage palatoplasty (Hans Pichler technique for hard palate closure) at 3 months and at 12 months to soft palate closure (Sommerlad technique); and Group 3 (G3) ­ children without craniofacial anomalies. Linear measurements, area, and occlusion were evaluated by stereophotogrammetry software. Shapiro-Wilk test was used to verify normality. ANOVA followed by posthoc Tukey test and Kruskal-Wallis followed by posthoc Dunn tests were used to compared groups. Results: For the measures intercanine distance (C-C'), anterior length of dental arch (I-CC'), and total length of the dental arch (I­MM'), there were statistical differences between G1x G3 and G2xG3, the mean was smaller for G1 and G2. No statistically significant differences occurred in the intermolar distance and in the dental arch area among groups. The occlusion analysis revealed significant difference in the comparison of the three groups (p=0.0004). Conclusion: The surgical effects of two rehabilitation protocols affected the occlusion and the development of the anterior region of the maxilla of children with oral clefts when compared to children without oral clefts.

Dental arch characteristics among South Indian twins - A morphometric study

Genetic and environmental factors are essential in occlusal variations and malocclusion and have been of considerable interest to orthodontists. Studies on twin pairs are one of the most effective methods for investigating genetically determined occlusal variables. Many studies have focused on distances between first molars or between canines but malocclusions can also occur in other regions of the dental arch. Aim: To evaluate the characteristics of the dental arch between pairs of Monozygotic (MZ) and Dizygotic (DZ) twins from Southern India. Methods: A random sample of 51 twin pairs (12­18years old) participated in this study. The zygosity of twin pairs was recorded by facial appearance. The occlusion of the first permanent molars was recorded according to Angle's classification. Study models were prepared to assess dental arch characteristics (i.e., arch form, arch perimeter, arch length; intercanine, intermolar width, and teeth size discrepancy). The obtained data was statistically analyzed using SPSS software 19.0. The student's t-test (two-tailed, independent) and Chi-square test was used to determine the significance of studied parameters. Results: Angle's Class I molar relation was more commonly observed followed by the Class II molar relationship among twins. The measured dental arch dimensions did not show a statistically significant difference among twin pairs. The ovoid arch form was commonly observed among Monozygotic and Dizygotic Twins. There was a similarity among MZ and DZ twins in the anterior and overall Bolton's ratio. Conclusion: There were similar occurrences of measured parameters among twins, which showed genetic predominance in the expression of measured dental arch traits

Six-year post-surgical evaluation in the treatment protocols in the dental arches of children with oral cleft: longitudinal study

Abstract Oral cleft surgical repairs are performed using different techniques worldwide. Objective To evaluate and compare the development of the dental arches of children with unilateral cleft lip and palate before and after the primary surgeries performed with different techniques at the first months and six years of life. Methodology This is a retrospective longitudinal study. The sample comprised 56 dental casts divided int the following groups: Group 1 (G1) - cheiloplasty (Millard technique) at three months and one-step palatoplasty (von Langenbeck technique) at 12 months; and Group 2 (G2) - cheiloplasty (Millard technique) and two-step palatoplasty: anterior hard palate closure (Hans Pichler technique) at three months and posterior soft palate closure (Sommerlad technique) at 12 months. The digitized dental casts were evaluated at three months - pre-surgical (T1) and six years of life- post-surgical (T2). The following linear measurements were analyzed: intercanine (C-C'), intertuberosity (T-T') distances; anterior dental arch (I-CC'), anterior intersegment (I-C'), and total arch (I-TT') lengths. The palate area was also measured. Parametric and non-parametric tests were applied (p<0.05). Results In G1, the intragroup comparison showed statistically significant smaller I-CC' and I-C' at T2 (p=0.001 and p<0.001, respectively), while T-T', I-TT', and area comparisons were significantly greater (p<0.001, p=0.002, and p<0.001, respectively). In G2, the intragroup comparison exhibited statistically significant smaller C-C' and I-C' at T2 (p=0.004, for both), whereas T-T', I-TT' and area comparisons were significantly greater (p<0.001, p=0.004, and p<0.001, respectively). At T2, the intergroup analysis revealed that G1 had a statistically significant smaller I-CC' (p=0.014). The analysis of the intergroup differences (∆=T2-T1) showed that G1 had a statistically smaller I-CC' (p=0.043). Conclusion The two-step palatoplasty showed a more favorable prognosis for the maxillary growth than one-step palatoplasty in children with oral clefts.

Evaluation of palatal volume in children with cleft lip and palate: a comparison of two surgical protocols / Avaliação volumétrica do palato em crianças com fissura labiopalatina: comparação de dois protocolos cirúrgicos

Objective: Compare the palatal volume in children with unilateral cleft lip and palate before and after two surgical protocols. Material and Methods: Retrospective data collection was performed in a specialized hospital. The sample comprised 120 digitized dental models divided into, Group 1 (G1) ­ participants submitted to cheiloplasty at 3 months (Millard technique) and one-step palatoplasty at 12 months (von Langenbeck technique); Group 2 (G2) ­ participants submitted to cheiloplasty (Millard technique) and hard palate closure (Hans Pichler technique) at 3 months and soft palate closure at 12 months (Sommerlad technique). The dental models were evaluated at Time 1 (T1): before primary plastic surgeries, Time 2 (T2): 1st post-surgical phase, and Time 3 (T3): 2nd post-surgical phase. The volume was measured through stereophotogrammetry system software. Parametric and non-parametric statistical tests were applied (α=5%). Results: The intragroup analysis revealed that G1 had a statistically significant increase in volume at T2 followed by a reduction at T3 (p=0.003); G2 showed a statistically significant increase of dental arch volume between T1 and T2 (p=0.001). There was no statistically significant difference in the intergroup and gender analyses (p>0.05). Conclusion: The surgical protocol influenced the palatal volume of children with unilateral cleft lip and palate. This study suggested that two-step palatoplasty protocol has a tendency to be more appropriate.(AU)

Objetivo: Comparar o volume palatino em crianças com fissura unilateral de lábio e palato antes e após dois protocolos cirúrgicos. Material e Métodos: A coleta de dados retrospectiva foi efetuada em um hospital especializado. A amostra foi composta por 120 modelos dentários digitalizados divididos em, Grupo 1 (G1) ­ participantes submetidos a queiloplastia aos 3 meses de vida (técnida de Millard) e a palatoplastia em única etapa aos 12 meses (técnica de von Langenbeck); Grupo 2 (G2) ­ participantes submetidos a queiloplastia (técnica de Millard) e fechamento do palato duro (técnica de Hans Pichler) aos 3 meses de vida e fechamento do palate mole aos 12 meses (técnica de Sommerlad). Os modelos dentários foram avaliados em Tempo 1 (T1): antes das cirurgias plásticas primárias, Tempo 2 (T2):1ª fase pós-cirúrgica e Tempo 3 (T3): 2ª fase pós-cirúrgico. O volume foi mensurado por meio do software do sistema de estereofotogrametria. Testes estatísticos paramétricos e não-paramétricos foram utilizados (α=5%). Resultados: As análises intragrupos indicaram que G1 apresentou aumento estatisticamente significante em T2 seguido de redução em T3 (p=0.003). G2 apresentou crescimento estatisticamente significativo do volume palatino entre T1 e T2 (p=0.001). Não houve diferença estatisticamente significante nas análises intergrupos e entre gêneros (p>0.05). Conclusão: O protocolo cirúrgico influenciou o volume palatino das crianças com fissura unilateral de lábio e palato. Este estudo sugeriu que o protocolo da palatoplastia em duas etapas possui uma tendência de ser mais apropriado.(AU)

Brazilian Adults Believe that Complete Dentures would be the Solution to the Oral Impacts Caused by Reduced Dentition

Abstract Objective: To evaluate the direct and oral impact-mediated association between reduced dentitions and the self-perceived need for complete dentures (CD) in dentate adults. Material and Methods: Data from the Brazilian Oral Health Survey (2010) were analyzed. The outcome was self-perceived need for CD. Functional dentition (FDClassV) was defined by the presence of the following criteria: level I - ≥1 tooth in each arch, level II - 10 teeth in each arch, level III - 12 anterior teeth, level IV - ≥ 3 posterior occluding pairs (POPs) of premolars and level V - ≥1 bilateral POPs of molars. Oral impacts were assessed with Oral Impacts on Daily Performances scale. Results: FDClassV was associated with a less self-perceived need for CD both directly and mediated by oral impacts. Dentitions without level V were associated with the outcome mediated by oral impacts. Between individuals with 10 teeth in each arch, self-perceived need for CD was similar for those who had or not anterior teeth and POPs. Individuals with <10 teeth in each arch and level III did not have a higher frequency of self-perceived need for CD compared to those with level II. Conclusion: Oral impacts mediated the association between reduced dentitions and self-perceived need for CD. Individuals with tooth loss may report need for CD, even when they have dental configurations compatible with functionality.

Effects of Fixed and Removable Space Maintainers on Dental Plaque and DMFT/dft Values / Efecto de los mantenedores de espacio fijos y removibles en la placa dental y en los valores de los índices DMFT/dft

ABSTRACT: Purpose: Space maintainers are important for the health and placement of children's primary and permanent teeth. However, plaque and caries levels can be negatively affected when a dental appliance is in the mouth. This study aims to evaluate the oral health of pediatric patients that have space maintainers applied as a result of early tooth loss. Methods: This study included 100 systemically healthy patients between the ages of 4-15 years that were treated with space maintainers due to early loss of teeth. Decayed, missing, filled tooth index values and dental plaque status of the participants were recorded. Controls were performed in the 6th and 12th month. The index results were compared and evaluated statistically using ANOVA and paired-t-tests. Results: A total of 116 space maintainers, including 36 band and loops, 16 lingual arches, 21 palatal arches, 43 removable appliances, were evaluated in the study. Statistically significant differences were found between the pre-treatment and post-treatment index values (p<0.001). In the group of band and loops and removable space maintainers; the increases in DMFT/dft values of 6th month and 12th month according to initial DMFT/dft values were statistically significant (p<0.05). For plaque index, the increase in 12th month of all types of appliances were found statistically significant (p<0.001). The greatest increase in plaque index level was seen in the teeth of patients that had been treated with a lingual arch. Conclusions: Incompatible space maintainers can lead to caries, increased plaque accumulation, demineralized areas, and periodontal problems. The accumulation of plaque and difficulty of cleaning the teeth, especially in the fixed space maintainers, negatively affects the health of teeth. For this reason, good oral hygiene should be provided to patients and controls should be regularly performed.

RESUMEN: Los mantenedores de espacio son importantes para la salud y la colocación de la dentición primaria y permanente de los niños. Sin embargo, los niveles de placa y caries pueden verse afectados negativamente cuando se coloca un aparato dental en la boca. Este estudio tiene como objetivo evaluar la salud bucal de pacientes pediátricos a los que se les aplicó mantenedores de espacio como resultado de la pérdida temprana de los dientes. Métodos: Este estudio incluyó a 100 pacientes sistémicamente sanos entre las edades de 4 a 15 años que fueron tratados con mantenedores de espacio debido a la pérdida temprana de dientes. Se anotaron los valores del índice de dientes cariados, faltantes y el estado de la placa dental. Los controles se realizaron en el 6° y 12° mes. Los resultados del índice se compararon y evaluaron estadísticamente mediante ANOVA y pruebas t pareadas. Resultados: Un total de 116 mantenedores de espacio, incluyendo 36 bandas y bucles, 16 arcos linguales, 21 arcos palatinos, 43 dispositivos removibles, fueron evaluados en el estudio. Se encontraron diferencias estadísticamente significativas entre los valores de los índices en el pretratamiento y postratamiento (p<0.001). En el grupo de bandas, bucles y mantenedores de espacio removibles los aumentos en los valores de DMFT/ dft en el sexto mes y el 12º mes fueron estadísticamente significativos (p<0.05). Para el índice de placa, el aumento en el 12º mes de todos los tipos de aparatos se encontró estadísticamente significativo (p<0,001). El mayor aumento en el nivel del índice de placa se observó en los pacientes que habían sido tratados con un arco lingual. Conclusiones: los mantenedores de espacio pueden provocar caries, aumento de la acumulación de placa, áreas desmineralizadas y problemas periodontales. La acumulación de placa y la dificultad de limpiar los dientes, especialmente en los mantenedores de espacio fijos, afecta negativamente la salud dental. Por esta razón, se debe proporcionar una buena higiene bucal a los pacientes y se deben realizar controles regularmente.

Innovative method to assess maxillary arch morphology in oral cleft: 3d-3d superimposition technique

Abstract This study aimed to analyze the maxillary growth and development of children with oral clefts using the innovative method of 3D-3D superimposition technique. Children with unilateral complete cleft lip (UCL) and unilateral cleft lip and palate (UCLP) participated in the study. The impressions of the dental arches were executed 1 day before and 1 year after lip repair surgery. A 3D laser scanner digitized the dental models and the stereophotogrammetry system software analyzed the 3D-3D superimpositions in two groups of matches (same child, UCL and UCLP) and one group of mismatches (different individuals). The differences were evaluated by Root Mean Square (RMS) and expressed in millimeters (mm). Kruskal-Wallis test followed by post-hoc Dunn test and Mann-Whitney test were assessed to compare the groups (α=5%). RMS was 1.34 mm (± 0.37) in UCL group, 1.41 mm (± 0.32) in UCLP group, and 3.38 mm (± 1.28) in mismatches group. RMS was significantly greater in mismatches than in matches groups (p<0.0001). No statistically significant differences occurred between genders. The 3D-3D superimposition technique showed the maxillary development after lip repair surgery in the anterior region of the palate. Thus, it is suggested that the cleft amplitude and the palatal segments proportion influenced the morphological heterogeneity and, consequently, the development and maxillary growth of children with orofacial cleft.

Resumo O objetivo deste estudo foi analisar o crescimento e desenvolvimento maxilar de crianças com fissuras orais por meio de um método inovador da técnica de sobreposição 3D-3D. Participaram do estudo crianças com fissura unilateral completa de lábio (FL) e fissura unilateral de lábio e palato (FLP). As moldagens dos arcos dentários foram realizadas 1 dia antes e 1 ano após o reparo cirúrgico labial. Um scanner a laser 3D digitalizou os modelos dentários e o software do sistema de estereofotogrametria analisou as sobreposições 3D-3D em dois grupos correspondentes (mesmo indivíduo, FL e FLP) e um grupo não-correspondente (indivíduos diferentes). As diferenças foram avaliadas pelo Root Mean Square (RMS) e expressas em milímetros (mm). O teste de Kruskal-Wallis seguido do teste post-hoc de Dunn e teste de MannWhitney foram avaliados para comparar os grupos (α=5%). RMS foi de 1.34 mm (± 0.37) no grupo FL, 1.41 mm (± 0.32) no grupo FLP e 3.38 mm (± 1.28) no grupo não-correspondente. RMS foi significativamente maior no grupo não-correspondente (p <0.0001). Não houve diferenças estatisticamente significativas entre os gêneros. A técnica de sobreposição 3D-3D evidenciou o desenvolvimento da maxila após a cirurgia labial na região anterior do palato. Assim, sugere-se que a amplitude da fenda e a proporção dos segmentos palatinos influenciam na heterogeneidade morfológica e, consequentemente, no desenvolvimento e crescimento maxilar de crianças com fissura orofacial

Dental findings on face and neck imaging / Achados dentários nos exames de imagem da face e pescoço

Abstract When it is necessary to evaluate dental structures, the typical method is to obtain intraoral or panoramic X-rays at specialized dental clinics. However, in the daily practice of head and neck radiology, or even general radiology, it is common to encounter clinical situations or examination findings related to dental problems that should not be ignored. Because such problems can often be responsible for the clinical complaints of patients, this review aims to assist radiologists in identifying and describing common dental conditions on computed tomography of paranasal sinuses, face, and neck. It is important for radiologists to have knowledge of dental arch anatomy and its relationships with facial structures, as well as of major dental pathologies, including periapical sclerotic lesions, odontogenic cysts, fistulas, and abscesses, together with knowledge of incidental findings without clinical repercussions, which should be easily identified and stressed by the radiologist when necessary. The imaging methods most commonly used in evaluation of paranasal sinuses and face are computed tomography and magnetic resonance imaging. Those methods allow radiologists to recognize and become familiar with the main dental findings. The description of such findings by a radiologist can lead to a change in treatment strategy.

Resumo A avaliação das estruturas dentárias, quando necessária, é realizada na maioria das vezes com radiografias intraorais e panorâmicas em clínicas radiológicas especializadas em odontologia. No entanto, na prática do radiologista de cabeça e pescoço e mesmo do radiologista geral, é comum identificarem-se alterações odontológicas que não devem passar despercebidas. Este artigo de revisão tem como objetivo auxiliar o radiologista a identificar e descrever afecções dentárias comuns e, muitas vezes, responsáveis por frequentes queixas clínicas, nas tomografias computadorizadas de face e pescoço. O conhecimento da anatomia da arcada dentária, as relações com as estruturas da face, bem como o domínio das principais doenças odontológicas, como cáries, lesões escleróticas periapicais, cistos odontogênicos, fístulas, abscessos e outros achados incidentais sem repercussão clínica, devem ser prontamente identificados e valorizados pelo radiologista. Os métodos de imagem mais comumente utilizados na avaliação dos seios paranasais e face são a tomografia computadorizada e a ressonância magnética. Esses exames possibilitam a identificação e familiaridade com os principais achados dentários, que devem ser descritos para auxiliar na abordagem do paciente.

Three-dimensional movement of posterior teeth after losing the interproximal and occlusal contacts in adults / 北京大学学报(医学版)

OBJECTIVE@#To observe the movement of posterior teeth after losing the interproximal and occlusal contacts in adults from the amount and speed of mesial-distal, buccal-lingual, occlusal-gingival and three-dimensional movements.@*METHODS@#Twenty cases of metal post-core restoration from the Department of Prosthodontics, Peking University School and Hospital of Stomatology were recruited into this study, which was an observational study. The restored teeth had complete mesial, distal, and occlusal contacts before treatment. All the interproximal and occlusal contacts were removed during the preparation for the post-core. The three-dimensional positions of the post-core preparation were obtained by the intraoral scanner at the day of tooth preparation and that of post-core placement. The amounts of mesial-distal, buccal-lingual and occlusal-gingival tooth movement were measured in the software. On this basis, the amount of three-dimensional tooth movement was calculated. The speed of tooth movement was calculated based on the elapsed time between the two scans.@*RESULTS@#Ten females and ten males with an average age of (29.5±4.9) years were recruited. The average elapsed time was (10.9±2.7) days. The amount of the mesial-distal tooth movement was (134.8±61.2) μm, of the buccal-lingual tooth movement was (110.3±39.5) μm, of the occlusal-gingival tooth movement was (104.8±57.5) μm, and of the three-dimensional tooth movement was (211.4±71.0) μm, respectively. The amounts of mesial-distal, buccal-lingual and three-dimensional tooth movements were larger in female than in male (P < 0.05). The speed of the mesial-distal tooth movement was (13.1±7.8) μm/d, of the buccal-lingual tooth movement was (10.6±4.5) μm/d, of the occlusal-gingival tooth movement was (10.1±6.8) μm/d, and of the three-dimensional tooth movement was (20.5±9.7) μm/d, respectively. The speed of mesial-distal and buccal-lingual tooth movements were larger in female than in male (P < 0.05). The speed of three-dimensional tooth movement was slightly larger in female than in male, while there was no significant difference between different genders (P>0.05).@*CONCLUSION@#The three-dimensional position of posterior teeth changed after losing the interproximal and occlusal contacts in adults. The female had more significant and faster tooth movement than the male.

In Vitro Study of Tooth Surfaces After Interproximal Enamel Reduction: Extraoral Scanner and SEM Analysis

ABSTRACT Objective To perform a morphological evaluation concerning the extent of interproximal enamel reduction (IPR) with different manual instruments in different types of teeth and a qualitative analysis of enamel surface characteristics at the contact point before and after IPR. Material and Methods 40 freshly extracted, caries-free, and intact human teeth were used for the study (20 bicuspids and 20 incisors) and performed IPR just on the mesial surface. The morphological variation of contact point was evaluated by superimposed the stl file, obtained thanks to an extraoral scanner, at T0 and T1 for each tooth. Two types of strip were used, Intensiv Manual Ortho Strips Coarse/Medium and Steelcarbo Horico Strips. Teeth were then cut lengthwise, removed the most apical root portion and the mesial and distal halves were gilded and observed at different magnifications. Results The morphological variation following stripping mainly depends on the extent of the stripping, while the diameter, the type of strip and the shape of the tooth itself do not appear to be relevant. The 500X and 1500X magnifications allowed to appreciate better the characteristics of the surface of the stripped enamel and the differences with the intact enamel. All teeth treated, independently from the kind of strip used, shows deep marks and grooves in the direction of stripping. In both cases, the enamel appears significantly damaged at great magnifications. Conclusion Stripping always and inevitably leads to a change in the shape of the contact point and is directly correlated to the amount of stripping performed. The use of polishing after the removal of enamel interproximal is necessary in all cases.

3D technology to measure dental arches and create a template for lingual brackets technique

ABSTRACT Objective: This study aims at identifying anatomical dimensions of dental arches, based on landmarks currently used in the lingual orthodontic technique, and create an archwire form template to be used in orthodontic clinics. Methods: Maxillary and mandibular dental casts of 140 Caucasian individuals with natural and normal occlusion were digitized (3D), and the images were analyzed with Delcam Power ShapeTM 2010 software. The dental arch shapes and sizes were obtained from 14 landmarks selected on the lingual surface of the teeth. Points and segments defined by the software were used to create an archwire form template. Results: Various dental arch patterns were found for both maxilla and mandible. The smallest sizes were found in females, and the largest were found in male subjects. Six categories were defined for each gender, three for the maxilla and three for the mandible (Small, Medium and Large). A template was created with eighteen anatomic lingual archwire designs, nine for the maxilla and nine for the mandible, for both genders. Conclusions: Landmarks evaluated in this study showed dental arch differences between genders. This information enables making orthodontic lingual archwires that are more compatible with the anatomical forms and sizes of the maxilla and mandible. The findings also allowed the creation of a template for an anatomic lingual metallic archwire form to be used in the lingual technique.

RESUMO Objetivo: O presente estudo tem como objetivo encontrar as formas anatômicas e dimensões das arcadas dentárias com base em pontos de referência utilizados na técnica ortodôntica lingual, e criar um diagrama com um maior número de arcos metálicos para serem utilizados na clínica ortodôntica. Métodos: 140 modelos de indivíduos caucasianos com oclusão normal e natural foram digitalizados (3D) e as imagens, analisadas com o software Delcam Power ShapeTM 2010. A determinação das formas e tamanhos das arcadas dentárias foi obtida a partir de 14 pontos selecionados na superfície lingual dos dentes. Outros pontos e segmentos foram utilizados, com o auxílio do software, para definir um diagrama. Resultados: Foram encontrados diferentes tamanhos de arcadas dentárias linguais, tanto para a maxila quanto para a mandíbula. Os menores tamanhos foram os femininos, e os maiores, os masculinos. Definiram-se seis tamanhos para cada sexo, sendo três para a maxila e três para a mandíbula, nomeados como P, M e G. Foi criado um diagrama com dezoito desenhos de arcos linguais anatômicos, nove para a maxila e nove para a mandíbula, para ambos os sexos. Conclusões: A posição dos pontos de referência nesse estudo evidenciou diferenças entre os sexos, o que permitiu a criação de arcos mais compatíveis com as formas e dimensões anatômicas da maxila e mandíbula. A diferença entre os tamanhos das arcadas dentárias linguais possibilitou a criação de um diagrama com formas de arcos metálicos linguais anatômicos para serem utilizados na técnica lingual, para auxiliar o profissional a criar os seus próprios arcos.

Correlation Between Mesio-Distal Teeth Diameters and Arch Width

ABSTRACT Objective: To verify the existence of a correlation between the mesio-distal size of teeth and the arch width by analyzing the data separately for maxillary and mandibular arch in patients with ideal occlusion Material and Methods: 58 patients with ideal occlusion were studied, for a total of 276 files analyzed. Dental casts were then scanned using a professional scanner (Epson Perfection v 330) and images were obtained in TIFF format at 600 dpi. All single teeth measurements were carried out for all teeth of both arches using the VAM software (Vectra, Canfield Scientific, Fairfield, NJ, USA). The repeatability and reproducibility of the measurement method were evaluated using the Gauge R&R method. In case a correlation between tooth size and arch size is found to be significant, a linear regression analysis can be applied through the following statistical relationship: y=a+b*x, where y is the result (inter-molar distance "AvgB66" or inter-canine distance "Cusp 33"), and x the specific tooth. The a and b respectively represent the intercept (point of intersection between the line and the y axis) and the slope of the line that describes the regression ratio. Results: The statistical analysis highlights a significant correlation (p<1%) between the results of the mesio-distal measurements of each tooth and the two variables considered to define the size of each arch ("AvgB66" and "Cusp 33"). Based on these results, a numerical relationship "y=a+b*x" has been extrapolated. Thus, it is possible to calculate the estimated inter-molar or inter canine distance necessary to have the teeth aligned. Conclusion: The inter-canine and inter-molar distances can be estimated starting from measuring the mesio-distal diameter of a single tooth.

Fatores de risco associados à perda do comprimento da arcada dentária em crianças / Factores de riesgo asociados a la pérdida de la longitud del arco dental en niños / Risk factors associated with the loss of dental arch length in children

RESUMO Os dentes são mantidos em correta relação devido a uma série de forças que constituem o equilíbrio dentário, se uma dessas forças for alterada, são feitas alterações em relação aos dentes adjacentes, causando um problema de espaço nas arcadas dentárias. O objetivo foi identificar os fatores de risco associados à perda do comprimento da arcada dentária em crianças. Foi realizado um estudo observacional transversal descritivo em crianças da Escola Primária "Frank País" pertencente à área de saúde da Clínica Universitária de Especialidades Estomatológicas "Manuel Cedeño", entre janeiro de 2018 e fevereiro de 2019. O universo foi de 160 pacientes que cumpriram os critérios de inclusão. A perda prematura de dentes temporários apresentou-se como um fator de risco que levou à perda do comprimento da arcada dentária em 75,62 % das crianças estudadas, seguida pela cárie proximal (70,62 %), hábito de sucção digital (74,37 %) e anormalidade da musculatura vestibular (61,25 %); o grupo de 7-9 anos foi o mais afetado. Conclui-se que existe relação entre a perda prematura de dentes temporários, a cárie proximal, a sucção digital e a anormalidade da musculatura vestibular como fatores de risco para a perda do comprimento da arcada dentária em crianças.

RESUMEN Los dientes se mantienen en relación correcta debido a una serie de fuerzas que constituyen el equilibrio dentario, si se altera una de esas fuerzas se producen modificaciones en relación a los dientes adyacentes ocasionando un problema de espacio en las arcadas dentarias. El objetivo fue identificar los factores de riesgo asociados a la pérdida de la longitud del arco dental en niños. Se realizó un estudio observacional descriptivo transversal en niños de la Escuela Primaria "Frank País" perteneciente al área de salud de la Clínica Universitaria de Especialidades Estomatológicas Manuel Cedeño, entre enero de 2018 y febrero de 2019. El universo fue de 160 pacientes que cumplieron con los criterios de inclusión. La pérdida prematura de dientes temporales se presentó como factor de riesgo que propició la pérdida de la longitud del arco dental en el 75,62 % de los niños estudiados, seguido de la caries dental proximal (70,62 %), hábito de succión digital (74,37 %) y anormalidad de la musculatura bucal (61,25 %); el grupo de 7-9 años fue el más afectado. Se concluye que existe una relación entre la pérdida prematura de dientes temporales, la caries dental proximal, la succión digital y anormalidad de la musculatura bucal como factores de riesgo para la pérdida de la longitud del arco dental en niños.

ABSTRACT The teeth are maintained in correct relation due to a series of forces that constitute the dental balance, if one of these forces is altered, changes are made in relation to the adjacent teeth, causing a space problem in the dental arches. The objective was to identify the risk factors associated with the loss of dental arch length in children. A descriptive cross-sectional observational study was conducted in children of the "Frank País" Primary School belonging to the health area of the "Manuel Cedeño" University Clinic of Stomatological Specialties, between January 2018 and February 2019. The universe was 160 patients who complied with the inclusion criteria. The premature loss of temporary teeth was presented as a risk factor that led to the loss of the length of the dental arch in 75,62 % of the children studied, followed by proximal dental caries (70,62 %), digital suction habit (74,37 %) and abnormality of the buccal musculature (61,25 %); the group of 7-9 years was the most affected. It is concluded that there is a relationship between premature loss of temporary teeth, proximal dental caries, digital suction and abnormality of the buccal musculature as risk factors for the loss of dental arch length in children.

Evaluación del Índice de Korkhaus en adultos chilenos con oclusión normal / Evaluation of Korkhaus Index in Chilean adult individuals with normal occlusion

El examen de modelos es una de las múltiples herramientas diagnósticas que posee la ortodoncia y ortopedia dentomáxilofacial. Los valores con que se construyó su norma estadística están basados en poblaciones específicas y no reflejan las diferencias morfológicas existentes en el complejo cráneofacial entre las distintas etnias. El propósito de esta investigación fue identificar las longitudes transversales y sagitales de los maxilares de la población adulta mestiza chilena con oclusión normal y compararlas con el índice de Korkhaus basado en una población adulta caucásica alemana. Se reclutaron 20 estudiantes de pregrado de la Facultad de Odontología de la Universidad de Valparaíso con oclusión normal. Se registraron ambas arcadas dentarias con yeso y se aplicó el índice de Korkhaus: se midió la longitud interpremolar, la longitud intermolar, la longitud anterior superior y la longitud anterior inferior. La comparación entre los valores de la muestra y los valores referenciales del índice de Korkhaus fue hecha con la prueba de rangos de Wilcoxon mediante el software estadístico STATA 15.0 y se consideraron significativos valores de p<0,05. Se encontró una diferencia estadísticamente significativa en el valor de la longitud anterior superior (p-0,013); para la longitud interpremolar (p-0,9552) la longitud intermolar (p-0,8223) y la longitud anterior inferior (p-0,0452) no se hallaron diferencias. La mayor magnitud de la longitud anterior superior de la arcada dentaria respecto a la población adulta caucásica alemana se debe al rasgo de protrusión dentaria presente en la población mestiza chilena, lo cual no altera las características de una oclusión normal.

The model exam is one of many diagnostic tools in orthodontics and dentomaxillofacial orthopedics. The values on which the statistical norm were constructed, are based on specific populations and they do not reflect the morphological differences in the craniofacial complex between the different ethnic groups. The purpose of this study was to identify the transverse and sagittal maxillary and mandibular lengths of the Chilean mestizo adult population with normal occlusion, and compare them with the Korkhaus index based on a German Caucasian adult population. For this study 20 undergraduate students with normal occlusion were recruited from the Faculty of Dentistry of the University of Valparaíso. Both upper and lower dental casts were obtained from each student, and Korkhaus index was applied: the interpremolar length, intermolar length, upper anterior length and lower anterior length were measured. Comparison between the values of the sample and the reference values of the Korkhaus index was made with the Wilcoxon range test using the STATA 15.0 statistical software and significant values of p <0.05 were considered. A statistically significant difference was found in the value of the upper anterior length (p-0.013); for the interpremolar length (p-0.9552) the intermolar length (p-0.8223) and the lower anterior length (p-0.0452) no differences were found. The greater magnitude of the dental arch upper anterior length compared to the German Caucasian adult population is due to dental protrusion present in the Chilean mestizo population, which does not affect the normal occlusion characteristics.

Accuracy of Linear Measurements of Dental Models Scanned Through 3D Scanner and Cone- Beam Computed Tomography in Comparison with Plaster Models / Exactitud de las mediciones lineales de modelos dentales digitalizados a través de escáner 3D y tomografía computarizada de haz cónico en comparación con modelos de yeso / Precisão de medições lineares de modelos dentários digitalizados através de scanner 3D e tomografia computadorizada Cone-Beam em comparação com modelos de gesso

Abstract Introduction and objective: Virtual surgical planning uses clinical data, image testing, plaster models of dental arches and clinical photos to simulate an orthognathic. There are two ways to perform the scanning of plaster models: scanning for cone-beam computed tomography (CBCT) or 3D scanner. The purpose of this study was to assess the accuracy and the degree of magnification of plaster model images obtained through 3D scanner and CBCT. Materials and methods: The control group was the measurement performed on 40 plaster models by Mitutoyo caliper. The same 40 models were scanned through 3D scanner and CBCT in order to compare the degree of distortion. The models were tested on the Dolphin software. Six measurements were performed in upper and lower arches: intermolar distance; intercanine distance; segment A; segment B; mesiodistal and cervico-incisal distance of the right-side central incisor. Results: There was no statistically significant difference for upper and lower models. However, CBCT had the degree of distortion of 2.34%, while the 3D scanner presented the degree of distortion of 2.37% comparing the degree of distortion of both methods with the digital caliper. Conclusions: It can be concluded that only the distances of segments A and B of the upper model were not compatible in both scanning methods with the measurements of digital caliper. However, considering all of the measurements, 3D scanner and CBCT are trustworthy to perform da linear measurements on digital models and are sufficiently adequate for initial diagnosis and and are clinically acceptable in clinical dental practices.

Resumen Introducción y objetivo: La planificación quirúrgica virtual para la simulación de cirugías ortognatica utiliza datos clínicos, pruebas de imagen, modelos de yeso y fotos clínicas. Hay dos formas de realizar el escaneo de los modelos de yeso: escaneo con la tomografía computarizada de haz cónico (CBHC) o escáner 3D. El propósito de este estudio fue evaluar la precisión y el grado de alteración de las imágenes del modelo de yeso obtenidas a través del escáner 3D y la CBHC. Materiales y métodos: El grupo control fue la medida realizada en 40 modelos de yeso con el calibrador Mitutoyo. Los mismos 40 modelos fueron escaneados a través de un escáner 3D y CBHC para comparar el grado de distorsión. Los modelos fueron evaluados en el software Dolphin. Se realizaron seis medidas en los arcos superior e inferior: distancia intermolar; distancia intercanina; segmento A; segmento B; Distancia mesiodistal y cervico-incisaldel incisivo central del lado derecho. Resultados: No hubo diferencia estadísticamente significativa para los modelos superiores e inferiores. Sin embargo, la CBHC tuvo un grado de distorsión de 2.34%, mientras que el escáner 3D presentó un grado de distorsión de 2.37% comparando el grado de distorsión de ambos métodos con el calibrador digital. Conclusión: Solo las distancias de los segmentos A y B del modelo superior no fueron compatibles en ambos métodos de escaneo con las medidas del calibrador digital. Sin embargo, considerando todas las mediciones, el escáner 3D y la CBCT son confiables para realizar medidas lineales en modelos digitales, son suficientemente adecuados para el diagnóstico inicial y son clínicamente aceptables en las prácticas clínica odontológica.

Resumo Introdução and Objetivo: O planejamento cirúrgico virtual para a simulação da cirurgia ortognática usa dados clínicos, exames de imagem, modelos de gesso e fotos clínicas. Existem duas maneiras de digitalizar modelos de gesso: digitalização com tomografia computadorizada de feixe cônico (CBFC) ou scanner 3D. O objetivo deste estudo foi avaliar a acurácia e o grau de alteração das imagens do modelo de gesso obtidas através do scanner 3D e do CBFC. Materiais e métodos: O grupo controle foi a medida feita em 40 modelos de gesso com o calibrador Mitutoyo. Os mesmos 40 modelos foram digitalizados através de um scanner 3D e CBHC para comparar o grau de distorção. Os modelos foram avaliados no software Dolphin. Seis medições foram realizadas nos arcos superior e inferior: distância intermolar; distância intercanina; segmento A; segmento B; Distância mesiodistal e cérvico-incisal do incisivo central do lado direito. Resultados: Não houve diferença estatisticamente significante para os modelos superior e inferior. No entanto, CBFC tinha um grau de distorção de 2,34%, enquanto o scanner 3D introduziu um grau de distorção de 2,37% na comparação entre o grau de distorção de ambos os métodos com calibrador digital. Conclusões: As distâncias dos segmentos A e B do modelo superior não eram compatíveis em ambos os métodos de verificação com medições de calibre digitais. No entanto, considerando-se todas as medições, scanner 3D CBFC e são confiáveis para medições lineares em modelos digitais são adequados o suficiente para o diagnóstico inicial e são clinicamente aceitáveis nas práticas de consultório odontológico.

Arch parameters and dental discrepancy (crowding and spacing) in a sample of an Afro-Colombian population / Parámetros de arco y discrepancia dental (apiñamiento y espaciamiento) en una muestra de población Afrocolombiana

The aim of this study was to determine the differences in arch length, inter-canine distance, inter-premolar distance, intermolar distance and arch shape between dental discrepancies (crowding and spacing) in a sample of dental casts from the Afro-Colombian population of San Basilio de Palenque. An analytical, cross-sectional study was conducted on a convenience sample of 63 subjects aged 11 to 57years, of Afro-Colombian origin, with full dentition from first molar to first molar, without extensive caries or restorations, and excluding casts with defects due to loss. The differences between arch (upper and lower) variables were analyzed according to dental discrepancies. Plaster models digitalized with a TR1OS3 Mono scanner with exactitude (6.9 ± 0.9 pm) and precision (4.5 ± 0.9 pm) were analyzed with Orthonalyzer software. Statistical analyses were done on SPSS software (Version 20 for Windows) and Real Statistics. Spacing discrepancy of68.25% was found for upper arch and 66.66% for lower arch; crowding discrepancy of 19.04% for upper arch and 20.63% for lower arch, and an adequate ratio of 12.69% for both arches. No statistically significant difference (p>0.05) was found between arch parameters except for inter-premolar distance on the lower arch. The most frequent arch shape in the population was oval for both upper arch, with 76.19%, and lower arch, with 71.42%. Tooth size was larger in males than females but the difference was not statistically significant.

El objetivo de este estudio fue determinar las diferencias en longitud de arco, distancia intercanina, interpremolar, intermolar y la forma de arco entre discrepancias dentales (apiñamiento y espaciamiento), en una muestra de modelos dentales de la población afrocolombiana de San Basilio de Palenque. Se realizó un estudio analítico transversal, en una muestra por conveniencia de 63 sujetos con un rango de edad entre 11 y 57 años, de origen afrocolombiano, quienes tuvieron dentición completa de primer molar a primer molar, sin caries extensas, ni restauraciones; se excluyeron los modelos con defectos por el vaciado. Se analizaron las diferencias entre las variables de los maxilares (superior e inferior) con las discrepancias dentales. Se utilizaron modelos de yeso que fueron digitalizados con el escánerTR1OS3 Mono con una exactitud de (6.9 ± 0.9 pm) y una precisión de (4.5 ± 0.9 pm)y analizados con el software Orthonalyzer. Los análisis estadísticos se llevaron a cabo utilizando el software SPSS (Versión 20 para Windows) y Real Statistics. Se encontró una discrepancia de espaciamiento de un 68,25% para el arco superior y 66,66% en el arco inferior; y una discrepancia de apiñamiento en el arco superior de 19,04% e inferior de 20,63% y una relación adecuada de 12,69% para los dos arcos. No se encontraron diferencias estadísticamente significativas (p>0.05) en los parámetros de arco a excepción de la distancia interpremolar del arco inferior. La forma de arco más frecuente en la población fue ovalada tanto en el arco superior con un 76,19% como en el arco inferior con un 71,42%. En cuanto al tamaño dental, se presentó mayor tamaño en los hombres que en las mujeres, pero este no fue estadísticamente significativo.